- Swimming Pools, Power pools and Swimspas
- Portable Spas & Hot Tubs
Pool Equipment & Accessories
- Solar Covers
- Winter Debris swimming Pool Covers
- Reel & Roller Systems for Swimming Pools
- Swimming Pool Pumps & Sand Filters
- Swimming Pool Heaters
- Maintenance Equipment
- Swimming Pool Ladders, Step Units, Slides and Swimming Pool Water Features
- Automatic Swimming Pool Cleaners, Suction Pool Cleaners & Boost Pump Cleaners
- Swimming Pool Lighting
- Swimming Pool Pipework
- Swimming Pool Liners
- Swimming Machines
- Skimmers & Pool Fittings
- Automatic Pool Covers
- Swimming Pool Water Features
- Swimming Pool Safety Covers
- Swimming Pool & Spa Chemicals
- Water Purification Systems
- Games, Toys, Speakers and Inflatable Loungers for Swimming Pools
- Swimming Pool Domes & Enclosures
- Swimming Pool Safety, Aquafitness, Rehab, Therapy and Pool Lifts
- Outdoor Living
- Swimming Pool Parts
- Hot Tub Parts
Nano Elecro Plug & Play Flow-Line Electric Heaters
Ideal for above ground pools up to 12' diameter. The elecro plug and play heater comes ready to install in line - 3kW output for Above Ground Pools - Stainless Steel 316 tube- Reversible Flow switch - Only requires 1,000 lts per hour to operate - High limit safety and flow switch - 2m Plugged cable - 1.5 Female threaded connections with hose tail adaptors to allow connection to 32mm or 38mm flexible pipe (1.25 / 1.5)
The Elecro Nano pool heater is manufactured from top quality components and materials at the Elecro works in Hertfordshire, England.
Construction consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch with a gold tipped reed, and Titanium fulcrum pin.
The heater is supported on two feet, this permits either vertical wall or floor mounting. The heater control components are positioned on the top face of the casing. Screw fit adapters are supplied to allow connection to standard above ground pool flexible pipe work. The water inlet and outlet fittings can facilitate connection to either metric or imperial standard pipe.
The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.
- Highly Responsive
No more swimming in cold water. Now you can swim in comfort and extend your swimming season.
- Simple to Install
Plumb it and plug it in. A simple, cost effective solution to heating above ground pools.
- British Manufactured
- Ultimately Safe
230v 1 Phase Power Output and Load
3kW = 13 - Amp
The desired pool temperature can be easily set on the Elecro Nano heater using the panel-mounted thermostat dial. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).
Minimum Flow Requirement: 1m³ (1,000-litres) per hour Maximum Flow Velocity: 17m³ (17,000-litres) per hour Heating Element: Incoloy 825 (Yellow Enclosure) Flow Tube: BS 316 Stainless Steel Control Thermostat: 0ºC > 40ºC (1.0ºC Differential) Safety Thermal cut-out: 55ºC (Manual reset) Flow Switch: Gold tipped reed switch with Titanium fulcrum pin Wiring: High temperature, silicone sheathed, multi-strand copper conductors Seals: High temperature special formula polymer Working Pressure: 4 bar maximum Water Connections: 1½" BSP female thread Supplied Hosetails: For 1½" / 1¼" flexible pipe Mounting: Floor or wall mountable.
All Elecro heater prices include VAT & UK Mainland Delivery