XPS - POOL Insulation

XPS boards have excellent life-long thermal performance and very low water absorption, allowing them to be installed below the concrete slab or behind retaining walls without the need for a damp proof membrane (DPM).

For projects that require insulation products to have a global warming potential of less than 5, we can offer CO2 blown XPS ECO which is Code for Sustainable Homes Pol 1 compliant.

Key features:
• Very high compressive strength able to withstand
long-term static loads
• Excellent life long thermal performance
• Reduces heating bills and keeps the pool warmer for longer
• Very low water absorption (<0.7% after 28 days)
• Code for Sustainable Homes compliant option

XPS Thermal Boarding is an extruded polystyrene closed cell board (XPS). The boards 1250 x 600 x 80mm will enable you to obtain minimal heat loss through the walls and floor of the pool ( U-Value of 0.25 W/M2K).

Simple to install, the XPS system can save you ££££’s on various energy costs.

Important: Do not be tempted to use cheaper alternative under floor insulation such as EPS, Jablite, Polyurethane, Polystyrene or similar products as these absorb water and will have an adverse effect on retaining heat in your pool!

Each pack contains 5 no. 1250 x 600 x 800mm boards (3.75m2)
Each board = 0.75 sq.m2

1500-V XPS Thermal Board Pack (5) £140.00 (£28.00 per board)

All dealers & internet retailers, please note prices are subject to change – we advise contacting us prior to placing any orders.

Product Description

Composition

Kingspan Styrozone® H 350 R is a high performance rigid extruded polystyrene insulants of typical density 30 kg/m3, with a smooth, dense skin on both faces.

CFC/HCFC–free

Kingspan Styrozone® is manufactured without the use of HCFC/CFCs and has zero Ozone Depletion Potential (ODP).

Product Data

Standards and Approvals

Kingspan Styrozone® is manufactured to the highest quality standards under a quality management system which complies with the requirements.

Compressive Strength

The compressive strength of Kingspan Styrozone® H 350 R typically exceeds 300 kPa at 10% compression when tested to BS / I.S. EN 826: 1996 (Thermal insulating product for building applications. Determination of compression behaviour).

Thermal Expansion

The linear thermal expansion coefficient of Kingspan Styrozone® is 0.07 mm/m.K when tested to BS 4370–3: 1988 (2002) (Methods of test for rigid cellular materials. Method 13).
of BS EN ISO 9001: 2000 (Quality management systems. Requirements).