Spa Enclosure
)
)
Orlando Spa Dome
A single Spa enclosure consists of two polycarbonate panels; walls and door panels and an upper domelike air shaft panel. All wall sections and the two sliding door elements can move 360 degrees in either direction. There is a sliding back door too.
Easily assembled the only requirement is a level mounting surface and stable solid base for assembling (attaching) the ground rails. Assembling is reliant upon fixing of the leading lines and accuracy of all panels. 2-3 people can assemble the enclosure.
Inner diameter: 4.0m
Outside diameter: 4.11m
Height: 2.3m
Weight: 200kg
Width of double panel door: 2.47m
Sunhouse Spa Dome
The Sunhouse model is made up of 3 parts; 2 semi-domes as in the Orlando - and a standard pool enclosure segment with sliding side doors. One of the semi-dome is fitted with a wide, double panel door leading inside. The opening skylight provides good ventilation and it is possible to add sliding doors in the second semi-dome.
Inner diameter: 4.11m
Length: 6.16m
Height: 2.3m
Weight: 300kg
Width of double panel door: 2.47m
Benefits of Orlando and Sunhouse Spa Domes
- Provides you with luxury bathing at any time
- you are fully protected against strong winds, rains, leaves and debris carried by the wind.
- Opening orientation in any direction.
- Enjoy maximum access of sun rays into the interior
- Polycarbonate panels protect your skin against UV rays
- Privacy ensured by translucent panel option
- Adjust inside air temperature through wide opening doors
- Durability of weather proof aluminium profiles and ground rails ensure years of spa enjoyment
